ASTM C109/C109M-2011 液压水泥灰浆的抗压强度试验方法(使用2in.或50mm管试样)

作者:标准资料网 时间:2024-05-12 15:27:13   浏览:8919   来源:标准资料网
下载地址: 点击此处下载
【英文标准名称】:StandardTestMethodforCompressiveStrengthofHydraulicCementMortars(Using2-in.or[50-mm]CubeSpecimens)
【原文标准名称】:液压水泥灰浆的抗压强度试验方法(使用2in.或50mm管试样)
【标准号】:ASTMC109/C109M-2011
【标准状态】:现行
【国别】:
【发布日期】:2011
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:C01.27
【标准类型】:(TestMethod)
【标准水平】:()
【中文主题词】:抗压强度;水凝水泥灰浆;水凝水泥强度;砂浆强度;强度;水泥砂浆;立方体试件;水硬水泥混凝土;硅酸盐水泥
【英文主题词】:compressivestrength;hydrauliccementmortar;hydrauliccementstrength;mortarstrength;strength;Cementmortars;Cubespecimens;Hydrauliccementconcrete;Portlandcement
【摘要】:Thistestmethodprovidesameansofdeterminingthecompressivestrengthofhydrauliccementandothermortarsandresultsmaybeusedtodeterminecompliancewithspecifications.Further,thistestmethodisreferencedbynumerousotherspecificationsandtestmethods.Cautionmustbeexercisedinusingtheresultsofthistestmethodtopredictthestrengthofconcretes.1.1Thistestmethodcoversdeterminationofthecompressivestrengthofhydrauliccementmortars,using2-in.or[50-mm]cubespecimens.Note18212;TestMethodC349providesanalternativeprocedureforthisdetermination(nottobeusedforacceptancetests).1.2Thistestmethodcoverstheapplicationofthetestusingeitherinch-poundorSIunits.ThevaluesstatedineitherSIunitsorinch-poundunitsaretoberegardedseparatelyasstandard.Withinthetext,theSIunitsareshowninbrackets.Thevaluesstatedineachsystemmaynotbeexactequivalents;therefore,eachsystemshallbeusedindependentlyoftheother.Combiningvaluesfromthetwosystemsmayresultinnonconformancewiththestandard.1.3ValuesinSIunitsshallbeobtainedbymeasurementinSIunitsorbyappropriateconversion,usingtheRulesforConversionandRoundinggiveninStandard,ofmeasurementsmadeinotherunits.1.4Thisstandarddoesnotpurporttoaddressallofthesafetyconcerns,ifany,associatedwithitsuse.Itistheresponsibilityoftheuserofthisstandardtoestablishappropriatesafetyandhealthpracticesanddeterminetheapplicabilityofregulatorylimitationspriortouse.(Warning8212;Freshhydrauliccementitiousmixturesarecausticandmaycausechemicalburnstoskinandtissueuponprolongedexposure.)
【中国标准分类号】:
【国际标准分类号】:91_100_10
【页数】:9P.;A4
【正文语种】:


下载地址: 点击此处下载
基本信息
标准名称:钻芯检测离心高强混凝土抗压强度试验方法
英文名称:Determinating of the compressive strength of spun high-strength concrete cores
中标分类: 建材 >> 建材产品 >> 混凝土、集料、灰浆、砂浆
ICS分类: 建筑材料和建筑物 >> 建筑材料 >> 混凝土和混凝土制品
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2004-04-30
实施日期:2004-12-01
首发日期:2004-04-30
作废日期:1900-01-01
主管部门:中国建筑材料工业协会
提出单位:中国建筑材料工业协会
归口单位:全国水泥制品标准化技术委员会
起草单位:苏州混凝土水泥制品研究院
起草人:蒋元海、金舜、严志隆、王新祥、章杰春
出版社:中国标准出版社
出版日期:2004-12-01
页数:16开, 页数:8, 字数:15千字
适用范围

本标准规定了钻芯检测离心高强混凝土抗压强度试验的主要设备、芯样钻娶芯样加工、芯样抗压强度试验、芯样试件混凝土抗压强度推算值的计算、试验结果评定等。本标准适用于对离心高强混凝土制品的混凝土立方试件强度的代表性有异议的试验。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T2611试验机通用技术要求
GB/T3722液压式压力试验机
GB/T50081普通棍凝土力学性能试验方法标准

所属分类: 建材 建材产品 混凝土 集料 灰浆 砂浆 建筑材料和建筑物 建筑材料 混凝土和混凝土制品
基本信息
标准名称:A型卸料板
中标分类: 航空、航天 >> 航空器与航天器制造用设备 >> 模具
发布日期:1988-04-09
实施日期:1988-07-01
首发日期:1900-01-01
作废日期:1900-01-01
出版日期:1900-01-01
页数:1页
适用范围

没有内容

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 航空 航天 航空器与航天器制造用设备 模具